There are some real bad rumors about how useless LED replacement globes are and believe
me with some of the CHEAP LED lights being sold on web based sites most of the rumours
are true, however we have been doing major investigations working out what we as
caravaner's would use and what a candle would do a better job than.
With a performance based outcome we now have a range of LED replacements which
actually work.  

Incandescent,Dichroic and Florescent lighting in your Caravan or RV is the BIGGEST user of
12 volt battery power, on average most of the light fittings are between 10 to 21watts and
some over 50watts .
Lets say you have 21watt lights, if you have 3 lights on for 4 hours they will use a huge 21
Ampere Hours out of your battery, leaving the Battery in need of a healthy charge before the
next night of use.
LED lighting is the answer to limiting the biggest power user from your battery, on average
most LED replacement globes are between 1 to 2watts, so if we work out the same as the
above using 2watt replacement globe,
3 lights on for 4 hours will use a mere 2 Ampere Hours thats 900% less consumption.

Below is a comparison of Incandescent and LED performance
and  our range of LED globes and lights in store.
LED Lights and Replacement Globes
Above - Standard Recessed light widely used in the
Caravaning industry.
Each light here is 10watts and nicely light up the bench
space, however the light colour is yellow and easily
absorbed by the wood colours making it appear dull.
These two lights will use 1.7 Ampere Hours.
Above - Now on the right is the standard 10watt
Incandescent globe and on the left is the LED 1.3watt
replacement globe, notice the light colour difference, the LED
is whiter and sharper in colour
Above - Both lights are using the LED replacements, the
biggest difference you can notice is the surfaces the light is
shining on are now brighter, whiter and well lit.
THESE TWO LIGHTS WILL USE 0.2 AMPERE HOURS, THAT
IS 700% LESS THE POWER USE.
Above - Standard Narva twin 28watt again widely used
throughout the Caravaning Industry.
However again the light colour is yellow and easily
absorbed by the wood colours making it appear dull.
This ONE light will use a massive 4.8 Ampere Hours.
Above - Same light fitting, it now has 2 x 2watt wedge
globes fitted, you will notice how everything the light shines
on is much whiter and brighter in appearance.
This light now uses 0.3 Ampere Hours, thats 1600% less
than before.
Above - Left a 1.4watt LED replacement Bi-Pin Globe,
Right is a standard 10watt Dichroic globe.
Again dull yellow verses Bright Sharp White light.

If the two lights were 10watt Dichroic, 1.7 Ampere Hours.
Both lights are now 1.4watt LED replacements.
The area they light is much whiter in colour.

Both these lights are using 0.24 Ampere Hours.
700% less than before.
ABSOLUTE CARAVAN CARE
& ACCESSORIES
Hosting by Yahoo Web Hosting
Counter
unit 1/16 Abrams Street, Balcatta. WA.      08 9240 4552    
sales@absolutecaravancare.com

Copyright © 1999 - 2014, Evergame Pty Ltd All rights reserved
ACN 109 948 718      ABN 43 087 880 077
Our NEW 2D LED Circuit Boards are used as a direct replacement for the
'D' FIuro bulbs for Caravans and Motorhomes, in standard round &
square light fittings.

With easy installation into the terminal block, simply wire into 12V source.
No driver or inverter required.

Use of the three way switch included with the round board allows night
light or full light functionality. With quick start up & the night light feature,
this 2D board allows you to set your lighting output to cater to your own
personal preference.

IMPORTANT INSTALLATION NOTE
The ballast/starter must be disconnected before installing the LED fluoro
tube in the existing fluoro fitting.  No LED can run through a starter.  This
is quite an easy modification, simply take all electronics except the switch
out of the circuit (or by pass it), so that the power is runs directly through
switch direct to tube holder.
2D Fluro Replacement 48 LED 150mm 500 Lumen Cool White
G4 Bi-Pin Replacement -12, 15 & 18 LED Cool White
T10 Replacement - 6, 10 & 30 LED Cool White
G4 Disk Replacement - 6, 10 & 15 LED Cool White
This smart round white surface mount interior light with 'glow in the dark'
switch uses 12 SMD 3020 Cool White and Warm White LEDs. Available also
in Silver and Chrome (spare or interchangeable covers available). This
attractive low profile surface mount fitting, less than 12mm high, provides a
simple solution to complex lighting scenarios. Clear diamond polycarbonate
lens. Very easy to install.

LED Count: 12.   Colour Temp: Cool White 6000 - 6500K
Voltage: 12v DC.   Consumption - Watts: 1.0
.    80mm Diameter
Surface Mount Interior Light - 12 LED Cool White
Chrome
Silver
White
The new SMD Strip Light with switch
is fluorescent tubes. It is most
effectively used under cupboard
directly above bench top or on the
ceiling directly above the table. It may
also be used in a wide range of
applications for RV lighting.

FEATURES
Direct replacement for fluorescent
tubes -500mm
Type of LED - SMD3528
No. of LEDs - 90
LED Color - white
Beam Angle - 120 degrees
Input Voltage - 10~30V DC
Power Consumption - 7 watts
Base - Rigid
Lumen Output - white 580lm
Operating Life - >30,000hrs
Strip Lighting
The new SMD Garnet, Lynx, Griffin
&  Taurus Spotlight is an ultra
energy efficient replacement for
standard reading lights. It is most
effectively used as a wall light for
reading or other tasks. It is available
in satin chrome or polished brass to
match interior fixtures (ie handles,
appliances or railing).
FEATURES
Direct replacement for standard
spotlights
Type of LED - SMD5050
No. of LEDs - 10
LED Color - white
Beam Angle - 120 degrees
Input Voltage - 10~30V DC
Power Consumption - 2 watts
Lumen Output - white 160lm
Operating Life - >30,000hrs
Light Fixture colors - Satin Chrome /
Polished Brass
Base Diameter - Ø50mm
Internal Spot Light - 10 LED Cool White
FROM
THIS
TO
THIS
Quality Service You Can Rely On...
MRB5246 - EC6884 - EW124745 - MR11711
(08) 9240 4552
sales@absolutecaravancare.com
unit 1/16 Abrams Street
Balcatta, WA. 6021

BUSINESS HOURS
SHOWROOM HOURS
8.30am - 4.30pm Monday to Friday
Closed Saturdays
WORKSHOP HOURS
7.30am - 4.30pm Monday to Friday
Closed Saturdays

Input Voltage Range - 10-30VDC
Power Consumption - 1.3 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 6
LED Color - Cool White
Lumens - 96lm / 87lm
Beam Angle - 120º
Dimensions - Ø 23mm

Input Voltage Range - 10-30VDC
Power Consumption - 2 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 10
LED Color - Cool White
Lumens - 160lm/130lm
Beam Angle - 120º
Dimensions - Ø 31.5mm

Input Voltage Range - 10-30VDC
Power Consumption - 3 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 15
LED Color - Cool White
Lumens - 240lm
Beam Angle - 120º
Dimensions - Ø 44mm

Input Voltage Range - 10-30VDC
Power Consumption - 1.3 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 6
LED Color - Cool White
Lumens - 96lm / 87lm
Beam Angle - 120º
Dimensions - Ø 23mm

Input Voltage Range - 10-30VDC
Power Consumption - 2 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 10
LED Color - Cool White
Lumens - 160lm/130lm
Beam Angle - 120º
Dimensions - Ø 31.5mm

Input Voltage Range - 10-30VDC
Power Consumption - 3 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 15
LED Color - Cool White
Lumens - 240lm
Beam Angle - 120º
Dimensions - Ø 44mm

Input Voltage Range - 10-30VDC
Power Consumption - 1.3 watts
Bulb - Wedge 10mm
LED Type - SMD5050
LED Qty - 6
LED Color - Cool White
Lumens - 86lm
Beam Angle - 120º
Dimensions - Ø 23mm x L40mm

Input Voltage Range - 10-30VDC
Power Consumption - 2 watts
Bulb - Wedge 10mm
LED Type - SMD5050
LED Qty - 10
LED Color - Cool White
Lumens - 160lm
Beam Angle - 120º
Dimensions - Ø 30mm x L47mm

Input Voltage Range - 10-30VDC
Power Consumption - 4.2 watts
Bulb - Wedge 10mm
LED Type - SMD5050
LED Qty - 21
LED Color - Cool White
Lumens - 330lm
Beam Angle - 120º
Dimensions - L65mm x L50mm

Input Voltage Range - 10-30VDC
Power Consumption - 2 watts
Bulb - Wedge 10mm
LED Type - SMD5050
LED Qty - 10
LED Color - Cool White
Lumens - 160lm
Beam Angle - 120º
Dimensions - Ø 30mm

Input Voltage Range - 10-30VDC
Power Consumption - 3 watts
Bulb - Wedge 10mm
LED Type - SMD5050
LED Qty - 18
LED Color - Cool White
Lumens - 182lm
Beam Angle - 120º
Dimensions - Ø 20mm x L24mm

Input Voltage Range - 10-30VDC
Power Consumption - 0.5 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD3014
LED Qty - 12
LED Color - Cool White
Lumens - 60lm
Beam Angle - 120º
Dimensions - Ø 8mm x L11mm

Input Voltage Range - 10-30VDC
Power Consumption - 1.4 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD3528
LED Qty - 15
LED Color - Cool White
Lumens - 105lm
Beam Angle - 120º
Dimensions - Ø 13mm x L18mm

Input Voltage Range - 10-30VDC
Power Consumption - 3.2 watts
Bulb - G4 bi pin - 4mm
LED Type - SMD5050
LED Qty - 18
LED Color - Cool White
Lumens - 266lm
Beam Angle - 120º
Dimensions - Ø 23mm x L36mm
With optional night light
Input Voltage - 10-18 VDC
Power Consumption - 8 watts full light/ 1.2 night
light
Bulb - LED Circuit board (custom design)
LED Type - SMD5050
LED Qty - 40SMD full light/ 8SMD night light  
LED Colour - Daylight White
CCT (K) - 5000-5500K
Lumens - 500lm full light/ 100lm night light
Beam Angle - 120º
Dimensions - Ø150mm - height 1mm
IP Rating - Indoor
BA15D Automotive
A widely used globe
in Vehicle and
Caravan Stop Tail
combo light fittings.
Straight 12volt  
replacement 3.6watt
.
MR8, MR11 and MR16
straight replacement of
the 12volt 20watt or
50watt Dichroic lamp.
These replacements
range from 2watts to
6watts and can be used
as a house Low Voltage
light replacement.
BA15S Automotive
A widely used globe in
Vehicle and Caravan
indicators.
Straight 12volt  
replacement 3.6watt.
Festoon 31mm, 37mm or
42mm Straight replacement
for single Indicator, Stop or
Tail lights.
12volt from 1.3watts.